BQFBW - TIN/SILVER ALLOYS - XM200 CORE

Product Identification

Product ID:TIN/SILVER ALLOYS - XM200 CORE
MSDS Date:08/01/1992
FSC:3439
NIIN:01-010-1684
MSDS Number: BQFBW

Responsible Party
GARDINER SOLDER CO DIV OF GARDINER METAL CO
4820 S CAMPBELL AVE
CHICAGO, IL 60632-1416
US

Emergency Phone: 312-847-0100

Info Phone: 312-847-0100

Cage: 56244

Contractor
GARDINER SOLDER CO, DIV OF GARDINER METAL CO
CHICAGO, IL 60632-1416 US

Telephone: 312-847-0100/800-424-9300(CHEMTREC)

Cage: 56244

Ingredients

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 93-99%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293


SILVER (SARA III)

CAS: 7440-22-4

RTECS: VW3500000

Fraction By Weight: 1-7%

OSHA PEL 0.01 MG/M3

ACGIH TLV: 0.1 MG/M3; 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB


ROSIN

CAS: 8050-09-7

Fraction By Weight: .2-3.0%

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION OF DUST MAY CAUSE
IRRITATION. PROLONGED EXPOSURE CAN CAUSE PERMANENT RESPIRATORY
DAMAGE. HEALTH STUDIES HAVE SHOWN THAT POTENTIAL HEALTH RISKS MAY
VARY BY INDIVIDUAL. ALWAYS MINIMIZE EXPOSU RE AS A PRECAUTION.
PYROLYSIS OF ROSIN CORE SOLDER MAY RELEASE SMALL AMOUNTS OF
FORMALDEHYDE.
Explanation of Carcinogenicity:THIS COMPOUND CONTAINS NO INGREDIENTS AT
CONCENTRATIONS OF 0.1% OR GREATER THAT ARE CARCINOGENS OR SUSPECT
CARCINOGENS.
Effects of Overexposure:METALLIC TASTE IN THE MOUTH. IRRITATION OF THE
RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:RESPIRATORY/LUNG CONDITION.

First Aid

First Aid:SKIN: FLUSH WITH WATER IMMEDIATELY - TREAT FOR BURNS, SEEK
MEDICAL ATTENTION. EYES: FLUSH WITH WATER FOR 15 MIN - SEEK MEDICAL
ATTENTION. INGESTION: DRINK LARGE AMOUNTS OF WATER - SEEK MEDICAL
ATTENTI ON. NEVER GIVE LIQUIDS TO AN UNCONSCIOUS PERSON.
INHALATION: REMOVE TO FRESH AIR. SUPPORT RESPIRATION IF REQUIRED -
SEEK MEDICAL ATTENTION.

Fire Fighting

Flash Point:NAP
Autoignition Temp:Autoignition Temp Text:NAP
Lower Limits:NAP
Upper Limits:NAP
Extinguishing Media:DRY CHEMICAL, DO NOT USE WATER.
Fire Fighting Procedures:USE SELF-CONTAINED BREATHING APPARATUS ABOVE
1000C.
Unusual Fire/Explosion Hazard:PYROLYSIS OF ROSIN CORE SOLDER YIELDS
FORMALDEHYDE, OSHA & ACGIH TWA=0.1 MG/M3.

Accidental Release

Spill Release Procedures:COLLECT AND USE, IF CONTAMINATED OR IN SMALL
PARTICLES VACUUM OR COLLECT MATERIAL. NEVER USE METHODS WHICH
GENERATE DUST.

Handling

Handling and Storage Precautions:NONE SPECIFIED BY MANUFACTURER.
Other Precautions:AVOID CONTACT WITH FUME AND DUST.

Exposure Controls

Respiratory Protection:ABOVE TLV, NIOSH RESPIRATORS - SEE 29CFR
1910.134.
Ventilation:LOCAL EXHAUST VENTILATION IS PREFERRED.
Protective Gloves:HEAT RESISTANT DURING SOLDERING.
Eye Protection:GOGGLES OR FACE SHIELD DURING SOLDERING.
Other Protective Equipment:AS REQUIRED TO AVOID CONTACT.
Work Hygienic Practices:WASH AFTER USE. FOLLOW GOOD INDUSTRIAL HYGIENIC
PRACTICES.
Supplemental Safety and Health
DOT CLASSIFICATION: NOT REGULATED.

Chemical Properties

HCC:N1
Boiling Pt:B.P. Text:4010F,2210C
Melt/Freeze Pt:M.P/F.P Text:486F,252C
Vapor Pres:1
Vapor Density:NA
Spec Gravity:7.46
pH:NA
Viscosity:NA
Evaporation Rate & Reference:NAP
Solubility in Water:INSOLUBLE
Appearance and Odor:GREY SOLID, ODORLESS.
Percent Volatiles by Volume:NA

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:NONE.
Hazardous Decomposition Products:TOSIC METAL FUMES ABOVE 1000C.

Disposal

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH APPLICABLE FEDERAL, STATE AND LOCAL
REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.